Beautiful Floors: Four Ways To Impregnate Wooden Floors

Since wood is a material that tends to fade if not taken care of, it is important to find a good method of impregnation and maintenance.

Impregnating wooden floors is a time-consuming job. But today there are various methods to make the floor shine without so much trouble.

If you wait too long without impregnating it properly, you will see that little by little it starts to lose its character and elegance, since dirt has made it discolored and stained.

In addition , the material becomes poorly faster without treatment, so that moisture is more easily absorbed and the planks lose their shape.

What is the best way to impregnate the wood floor? Although the use of wax is the traditional method and is still common today, there are in fact other interesting products that achieve the same results.

In this article , we will share four effective ways to do the job, so you can do it when you want to see your hardwood floor shiny clean. Pay attention!

What should you use to impregnate wooden floors?

In the shop there are various products to impregnate the wooden floor. The traditional wax is still used on wooden floors; but if the tree is special, you will need to use other types.

If your floor is made of untreated wood, linoleum or cork, you can use liquid wax or oil. It is not recommended that you use this type of wax on vinyl flooring with urethane, or floors that are not impregnated.

Another excellent alternative is a water-based silicone polish. You can use this on almost any type of floor, except cork, linoleum and wood that is not impregnated.

Hard wax can be used on linoleum, cork, concrete and untreated wood; It should not be used on vinyl or urethane coated floors.

There are some homemade wax types that can be used on all kinds of wood, to make it shiny clean as if it were new. The results from the recipe may vary.

Effective ways to impregnate wooden floors

If you already know what is the best wax for your floor, this section will teach you how to use it properly so that the wood looks like new. Are you ready? Let’s get started!

1. Liquid wax and oil

Clean the surface of the floor to get rid of dust and dirt that may be on it.
Dampen a soft cotton cloth with liquid wax and spread it evenly across the floor.

Once dry, polish it with a clean towel or polisher.
When you see that all that is left is varnish, it is dry.

2. Water-based silicone polish

Sweep and mop the floor, to get rid of dirt that accumulates on the top and between the planks.
Moisten a clean rag and drain some of the polish on it.
Lay a thin layer on the wooden floor, but be careful not to make it bubble.
When dry, polish the floor with a clean towel or polisher.
Make sure each coat has dried completely before applying a new coat of polish.

3. Hard wax

Sweep or vacuum the floor before using this product.
When it is clean and dry, moisten a soft, lint-free cotton cloth.
Lubricate some of the wax on the floor, follow the instructions on the label.
Let it dry, then polish it with a clean towel or polisher.
When the floor looks dull, it is because it is dry.

4. Homemade recipe with wax and turpentine

If you want to use a homemade product, we have a simple beeswax and turpentine recipe for you. These are two ingredients with an oily consistency that makes the wood clean and shiny.

It is a preparation free of toxic chemicals, which you can use on your wooden floor, as well as furniture that is starting to look faded and stained.

Ingredients

1/4 cup grated beeswax (50 g)
1/2 cup turpentine (62 ml)

Preparation

Empty the grated beeswax into a glass bowl and melt it in a water bath.
When it starts to melt, stir with a wooden spoon and carefully empty the turpentine.
Mix until you have a homogeneous product and turn off the heat.
Let it cool down to room temperature, and put it in a container with a screw cap.

Note: If the smell of turpentine bothers you, you can add a few drops of essential oil.

Application

Clean the surface of the wooden floor and use the required amount of wax.
Spread it out with a microfiber cloth until it shines.

Choose the most appropriate method to impregnate wooden floors, and give it the treatment it needs to stay beautiful. As you can see, the way to do that is pretty similar. The only difference is which impregnation you use.